Installation Guide
Nameplate Installation Guide
Nameplates are delivered with all the necessary accessories for installation. While we recommend seeking help from a carpenter for installation, here are the steps if you choose to do it yourself:
For nameplates with screws and stainless steel stand-offs:
- Choose the installation location and ensure the nameplate is level, using a leveler if possible.
- Use the nameplate as a stencil and mark the screw hole positions on the wall with a pencil, aligning with the pre-drilled holes on the nameplate.
- Pre-drill the wall using a pilot bit. If needed, use wall anchors for additional support.
- Install each standoff base into the pre-drilled holes using a screwdriver or drill, taking care not to over-tighten.
- Place the nameplate over the standoff bases, then gently tighten the standoff caps by hand, securing the nameplate in place.
If you have any questions or need further assistance, please don't hesitate to contact us. Enjoy your new nameplate!